12/5/2023 0 Comments Librecad floor plan![]() If it is drawn upwards the parallel lines appear to the right of the original line.Īlthough the problem appears with both version 2.2.0 rc2 and version 2.1.3 of LibreCAD. If the original vertical line is drawn downwards the parallel lines appear the left. The side of original line on which the parallels appear depends on the direction in which the original line is drawn. The suggests that the original line is correctly located but the direction of approach is not being correctly detected. However, the parallel lines are only displayed on one side of the original line, irrespective of the side from which the original line is approached. The parallel function works when the original line is horizontal or vertical. When the Parallel function is performing correctly, parallel lines appear on one or other side of the original line, depending on the side from which the original line is approached. So the built-in trackpad is not the problem. This made no difference to the problem whatsoever. Firstly, I plugged a mouse into the USB port. I have been able to narrow down the range of possibilities for this problem. The Mac Mini is quite old and High Siera is the last version on the Mac OS which is compatible with it and downgrading the MacBook Air to High Siera would be an horrendous challenge. Unfortunately, I have no way of determining whether this behaviour is related to the hardware or to the operating system. However, on my MacBook Air as well as only having parallel lines appear when the original line is either horizontal or vertical, the parallel lines will only appear on one side of the original line. ![]() I believe that this is the correct behaviour. Whereas on the Mac Mini, when I select the Parallel function and move the cursor across a line I get parallel lines appearing on ether side of the original line depending on the side from which I approach the original line. I get the same strange behaviour with both versions of LibreCAD. rc2 of LibreCAD on my own MacBook Air running Big Sur. I then compared Version 2.1.3 with Version 2.2. On that system the parallel function works. How should I be troubleshooting the problem?įirstly, I installed LibraCAD on my son's old Mac Mini which is running High Siera. However, I don't get a line on the construction layer. There is no error message in the command box. However, when I try to draw parallels, using the parallel command, nothing appears. I now need to draw two lines parallel to one side. On the construction layer I have been able to draw two adjacent sides, neither of which are parallel to the X or Y axis. There is also an easement runs along one of the parallel sides. In the case of the site plan that I am trying to draw up, two sides of the block are parallel (but the other two are not). Added to that if one tries to do something and is not able to produce the result that is wanted it is difficult to determine whether the instructions have not been carried out correctly or they have been but the results is not visible because of the scale at which one is working. For basic functions this is easy but once one gets to more complicated functions the difficulty increases. So working out what one needs to do involves interpreting between what one would do on a PC using an earlier version of LC and what one needs to do on a Macintosh using the latest version of LC. My first problem is that such manuals as exist seem to be written for PC versions of LC and are for earlier versions of LC. I am using LibreCAD 2.2 rl 2 on a Macintosh laptop running Big Sur. What I am trying to do first is to draw the boundary of the house block. So the area is quite large in relation to the final drawing. ![]() The site plan is for a house block which is an odd shape but fits in a space of approximately 145 feet by 90 feet. I am trying to use LibreCAD to draw a site plan but I am finding is extremely frustrating.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |